Loading...
also knownas pointer type irrigation, it's made up of center trestle table, spans,
cantilever and synchronous system controlled by electric etc. The spans
rotate repeatedly around the base an chored to the ground , the sprinklers on the truss will spray water uniformly to the crops.What every square,rectangular or "L"-shape field, the irrigation system supplied us is the best solution for you.
The center pivot is firmly fixed on the cement base to eliminate the force generated by the machine operating on irregular terrains, , so that the
water supply pipe can rotate freely in a circle radius to irrigate the whole round field.
Application Area:
▪ Large scale land plots of
square or round shape
▪ Terrain slope: ≤25°
Farm three wheel towing center pivot sprinkler irrigation machine is an irrigation system has proved itself in this field.
This system irrigates at high performance economically with different climate and terrain conditions. Galvanized anti-corrosion coating consisting of high-grade steel construction.This system makes automatic irrigation in a circular motion over a single platform.
Linear Irrigation, also known as lateral move irrigation.The moving track of linear irrigation is parallel, which means all the spans and center point move back and forth across the field in parallel. The water will be supplied from the center point to spray uniformly into the field through the sprinkler. It can use a generator as power.
Gengze supplies two options: Two-wheel linear irrigation and Four-wheel linear irrigation.
▪ Flexible and convenient to operate
▪ Cross the field back and forth
▪ Applied to narrow and long land plots
▪ No dead angle of irrigation
▪ Move in irregular-shape or L-shape fields, also can be dragged to another field “Back and forth” irrigation via a linear of 10 spans maximum. Water supply via a flexible pipe or a PEHD connected to a articulated elbow. Tower on a chassis with 4 motorized wheels 2 jointed axles for a better adaptation to the terrain.Can accommodate an electricity generator and a diesel tank.
Possibility to add an overhang at each end of the spans.Furrow guidance, steel cable guidance, and GPS guidance.Water can be supplied via channel , tower on a chassis with 4 motorized wheels , 2 jointed axles for a better adaption to terrain can be accommodate an electricity generator. And another loaded gen-set and a self-cleaning strainer by water from a lateral channel rates of up to 800 m3/ furrow guidance.
This machine is a kind of universal irrigation machine combined center pivot and linear function. It can support both lateral moving and rotating irrigation. It's very suitable to wide terrain with semi-circular at edge.It helps to maximize the effective irrigation utilization rate of field, and promote the concept of irrigation to a new level.
The corner arm span device is an additional pipeline span and a tower device. The corner arm is usually retracted beside the span of the terminal tower. When the unit rotates and approaches the corner, the corner arm gradually expands and the ground The water valve on the corner arm gradually opens, and the sprinkler starts to irrigate. When the unit rotates and leaves the corner, the corner arm gradually retracts, the water valve on the corner arm gradually closes automatically, and the sprinkler automatically stops working.
The extension and retraction of the angle arm is controlled by the main span automatic system. However, adding the angle arm irrigation device will increase the cost of the whole machine a lot, so the angle arm device is suitable for the installation of the central pivot machine on the larger plot.